THE CHEVRON DESIGN
 |
Raised profiles are of the same rubber as the covering and the hight is of 15mm. |
MAXIMUM TRANSPORT ANGLES
| MATERIAL | SIZE | MAXIMUM ANGLE |
| Cement | - | Until 30º |
| Coal pieces | 0-100 mm. | Until 35º |
| Gravel | 15-80 mm. | Until 35º |
| Sand | - | Until 45º |
* We must consider that the elevation angle can be affected by the belt´s speed, the tough form and the material being fed.
PRODUCTION WIDTH
We manufacture belts with standard widths of 400, 500, 600, 650, 700 and 800 mm.
COVERING QUALITIES
Chevron belts can be manufactured in the same qualities as other flat belts.
ELONGATION UNDER STANDARD LOAD
To determine tension course of a belt, the technical conditions of the installation must be taken into account. As a guideline, the DIN 22.102/89 norm establishes the following values:
|
Minimum breaking Load |
Elongation under standard load |
|
200-
500 |
1,5
% |
|
630
-1250 |
2,5
% |
|
1600
- 3150 |
3
% |
* The standard load is 10% of minimum breaking load.