Depending on the temperature of the works,
we offer the following belts:
T-110 Low to Medium heat resistancevv.
T-150 Medium heat resistance.
T-170 Medium to High heat resistance.
Temperatures of use are the following
| Permissible | Maximum temperature for more than 30 mm granulometry | Maximum temperature for carcass | |
| T-110 | 110 | 120 | 80 |
| T-150 | 150 | 170 | 130 |
| T-170 | 170 | 200 | 150 |
RECOMMENDED THICKNESS OF COVER
For heat resistant belts, we recommend a minimum
thickness of 4+2
ELONGATION UNDER STANDARD LOAD
To determine tension course of a belt, the technical conditions of the installation must be taken into account. As a guideline, the DIN 22.102/89 norm establishes the following values:
|
Minimum Breaking Load |
Elongation under Standard Load |
|
200-
500 |
1,5
% |
|
630
-1250 |
2,5
% |
|
1600
- 3150 |
3
% |
* The standard load is 10% of minimum breaking load.